Purchasing a diamond engagement ring can frequently be a confusing and intimidating experience for a guy. Most guys are just not interested in diamonds. If they pop up the question, they require an engagement ring but haven’t any clue what to search for.

This report gives a few simple, simple tips for men who do not have any idea about purchasing their very first diamond engagement ring.

1. What manner of engagement ring if I be searching for?

Unless your girlfriend has told me she’s a specific style in mind, the safest bet is to purchase a straightforward and refined gold ring setting using one diamond set on top. This is referred to as a diamond solitaire engagement ring. The golden setting will probably cost you less200. If she would like to select a fancy setting afterwards, you can get rid of the single diamond out of the ring and use it as the center bead at a fancy ring setting without sacrificing much in your initial investment.

2. What colour gold if you pick for the ring?

Take note of exactly what your lady wears. Yellow golden women usually wear bright colours and have olive or darker skin tone. Most women nowadays prefer gold. If she’s dark hair and will put on a great deal of white or black clothes, she’s a white golden woman.

3. What dimensions if the diamond maintain her engagement ring?

This is the response that is going to damage your wallet. A 1/4-carat diamond is from the question, far too little to get a solitaire engagement ring. A 1/2-carat diamond could be fine if that is all you are able to afford, but it isn’t likely to become an impressive engagement ring. A diamond involving 3/4 and 1-carat will truly get her excited. If she shows it to her girlfriends that they will be somewhat jealous that she obtained a man of standing (you) and they did not. This is excellent because of her self-image, and each girl requires a little increase in that section.

4. What’s the best price I will pay to get a significant diamond ring?

If you create a wise buy, you can find a 3/4-carat diamond ring for involving $950 and $2000. It’s possible to find a 1-carat diamond ring for involving $1200 and $3500. They key is to obtain a lesser quality diamond which isn’t downright awful. You need to shop the ideal equilibrium between diamond cut level, diamond clarity grade and pearl color level on the GIA score scale. It’s also advisable to purchase a diamond that’s certified by a respectable gem laboratory like GIA, IGI, IGL, or EGL-USA.

5. Where should I shop for my diamond ring?

First have a visit to the regional mall. Look, but do not purchase your diamond ring. In a few hours you will get acquainted with “The 4 C’s”, and you also wish to judge with your own eyes that the difference between the cheapest tier diamond, and also a top grade costly diamond. The jewellery salesperson will probably force you to get their expensive diamond. Do not be shy: ask to find out their cheapest diamond too. Then proceed to another jewelry shop.

Retail jewelry shops typically make a 50% markup in their diamonds. There are loads of reputable diamond retailers online which make between 7 percent to 15% markup on precisely the exact same diamond ring.

Get online and perform a search for “3/4 to 1 carat certified diamond”. Ensure that your diamond is certified by a few of these labs mentioned previously, which the site provides a 30-day no questions asked return policy. Do not attempt to get a diamond from a auction site.

6. Narrow your diamond ring options on several nice jewelry sites.

Now’s when you have to exercise your intelligent purchasing skill.

About diamond Clarity: About the GIA grading scale accredited diamonds have been rated for Clarity tier with a gemologist with a 10-power magnifying loupe. A Clarity tier of SI or greater means there are no inclusions (flaws) observable to the naked eye. This implies that unless friends and family have a magnifying glass handy, there’s absolutely no perceptible difference between a Clarity tier of SI and VVS, however there’s a sizable gap in cost. Contemplate SI as your best Clarity grade. A fresh I1 Clarity diamond may be a fantastic deal. When the observable flaws are white needles or crystals and they’re about the outer perimeter of the diamond (the crown angle), you’ll save500 to $1000 within an SI Clarity and also there will not be noticeable gap. You might get lucky with an I2 Clarity diamond, but you must be ready to return it. A fall to I2 Clarity will help save an additional $500 to $1000 within an I1 grade. But most I2-I3 diamonds are called in the trade “white smash” or even “suspended spit”, since that is exactly what they seem. Whenever your I2 Clarity diamond ring arrives, then take it in the sun and analyze it. When it’s altogether boring and foggy, return it. When it’s filled with black crystals and does not refract sun, go back. When it’s largely apparent in the middle (the table) and also you will see flashes of brilliance and scintillation (rainbow colours), then you’ve got a fantastic I-2 Clarity diamond and you’ve saved yourself some cash GSI vs GIA.

Concerning Diamond Color: if you would like the most significant diamond ring to the cheapest cost, estimating diamond Shade caliber is really straightforward. Most folks won’t see a large difference between a “colorless grade” (D-E-F) plus a “near-colorless tier” (G-H-I) about the GIA grading scale. It is possible to save money with confidence if the bead is certified as a G-H Color. You might see a warm throw when the diamond is accredited as an I Color, however that does not have any influence on the brilliance of your diamond. A K or lesser Color diamond is going to have a certain dirty-yellow cast, which means you shouldn’t purchase these Shade ranges.

Concerning Diamond Cut: The Cut Grade of a diamond is the most significant element when it comes to the brilliance and beauty of your diamond ring. Some diamond certifications do not say the Cut grade, so this really is where you need to count on the standing of the dealer you’re purchasing from. If it is possible to be sure your diamond is a great or Very Good Cut tier, then you’ve made a great investment. An Outstanding Cut diamond will come back a shower of white lighting, fire, and scintillation into the viewer’s attention. A Fair or Poor Cut diamond, whatever the Colour and Clarity grade, will be dull and lifeless. Start looking for the best Cut tier it is possible to find.

7. Make your closing diamond solitaire ring choice.

It is not a terrible idea to buy two diamond rings from various internet retailers. Ensure they have a clearly stated return policy for the entire purchase price. Compare both the rings side by side in sun, and return the one that you do not like.

From what you have read above, you could tell three things in saving money on a large diamond ring:

The “safe place” would be to choose a bead of SI Clarity, G-H Color and Outstanding Cut.

Secondly, the “best value” would be to choose a bead of I1 Clarity, G-H-I Color and Outstanding Cut.

Third, the “possible deal” would be to choose a bead of I2 Clarity, I-J Shade and Excellent to Very Good Cut.

Ensure that your diamond ring is laboratory certified, and be certain that you can return it for a complete refund if you don’t enjoy it.